Insulating machines and systems
Insulation Machines and Systems, made by WindEq TC, LLC, Russia
WindEq Technical Center designs and supplies a wide range of standard and special-purpose insulation machines depending on the technical requirements of the Customer.
Semi-automated and automated isolation is possible.
STANDARD CHARACTERISTICS OF EQUIPMENT WITH MOVABLE INSULATION HEAD
CHARACTERISTICS/MODELS | RT1
(MIN/MAX) |
RT2
(MIN/MAX) |
RT3
(MIN/MAX) |
RT4
(MIN/MAX) |
Capacity: Cross section of the tape wound on reel (max/min), mm |
16×30 5×10 |
20×50 5×15 |
35×100 10×20 |
50×150 10×40 |
Tape width, mm | 15 or 20 | 20 or 25 | 20, 25, or 30 | |
Turn | Variable | |||
Spool inner diameter, mm | 25 | 25 | 25 to 55 | |
Spool outer diameter, mm | 80 or 90 | 110 | 170 | |
Insulation rate,
maximum, rpm |
250 | 240 | 200 | 150 |
Distance between the sides of the reel, minimum, mm | 115 | 200 | 350 | |
Working air pressure, bar | 5.5 | |||
Recommended minimum diameter, mm | 12 | |||
Air flow rate, L/s | 18 | 26 |