Double-Tank Autoclave, made by WindEq TC, LLC, Russia
The double-tank version of the autoclave makes it possible to automate the process of impregnation of products, including preparation of the impregnation compound, to the maximum extent. To this end, it is equipped with a preparation tank, in which the impregnation compound is stored. Prior to use, this compound can be mixed, heated, and vacuum-treated.
The plant is controlled by a controller that performs a sequence of simple process steps that form a technological cycle. The controller also maintains the specified process parameters.
The autoclave is equipped with a hydraulic plant to control the cover raising and lowering and the bayonet lock.
This hydraulic plant features the hydraulic lock that ensures fixed position of the cover at the time of the power failure. The mixer motor of the preparation tank is connected via a coupling and a vacuum seal with the shaft of the fan mixer. The number of rotations can be changed by the operator from the control panel.
The cover of the autoclave is equipped with two windows. Illumination is ensured through one window, while the other window may be used to observe the production process.
PROCESSING LIMITS OF B-VPI-50 AUTOCLAVE
PARAMETER | VALUE |
Working volume of the autoclave, L | 80 |
Working volume of the preparation tank, L | 100 |
Vacuum, mbar | 5 |
Pressure, bar | 4 |
Hydraulic pressure, bar | 200 |
Maximum temperature of the autoclave, °C | 100 |
Heater power, kW | 10 |
Mixer drive power, kW | 1.1 |
Number of revolutions of the mixer, rpm | 200…1,000 |
Overall dimensions (LxWxH), mm | 1,510 x 1,400 x 1,550 |